18
3.11 Asset maintain notice
AS201E support send the asset maintain notice via SMS message,by send the SMS command to set the parameters
to to activate this feature.
SMS command:
*1234*MAINTENANCE:X,Y#
X= mileage, maximum 10000Km
Y= engine running time, maximum 5000 hours
If both X and Y are 0,means this feature deactivated.
For example :
*1234*MAINTENANCE:1000,0#
3.12 Battery Low Alert
When AS201E detected external battery output is with lower than 11.5V (This voltage can be configured by the
AS201E Configurator, defaults to 11.5V), system will generate Battery low alerts to A/B/C Numbers. And stop
draw vehicle battery, will switch to user internal battery for work.
After internal battery is going to use out again, system will generate another alert to A/B/C, and system will go to
deep sleep to avoid killing vehicle battery dead. But keep all alarm detection alive for protection.
3.13 Recovery Factory Default
By click the button
in the AS201E Configurator to be factory default setting.
By sending SMS command
*1234*V#
recover device to be factory default setting.
Be careful to use this command, because it will request you to re-configure the device again for working properly.
3.14 Remote Reboot
By sending SMS command
*1234*Z#
reboot AS201E remotely.
This is to solve problem if any operation fail and do quick problem shooting.
3.15 Locate in parking Lot
AS201E provides two methods for user to quick locate where the vehicle is by Siren sound and light flashing.
1
2
. By press Remote controller Siren button to make sound
. By send SMS command
*1234*L#
to get AS201E driving siren sound and light flashing.
Copyright © 2006-2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.
