manualshive.com logo in svg

Anatomic SITT Zitzi Seabass Pro, User Manual, Page: 24 / 56

Share
Download
Anatomic SITT Zitzi Seabass Pro User Manual Download Page 24

24

User manual  Zitzi Seabass Pro

www.anatomicsitt.com  | +46 11 16 18 00

Installation of caster

Insert the pin (A) underneath the chassis as illustrated. Then mount the front wheel 
house (K) using screw (B), washer (C) and the eccentric nut (D) and tighten.

Mounting of the caster on the caster house fork

Choose between four (4) different castors positions and then mount the caster 
wheel (F) using the supplied wheel axle (G), washer (H) and lock nut (I) in the 
desired mounting hole on the castor fork (K). 
Place the caster (F) in the castor fork (K) according to the picture. Place a washer 
on the wheel axle (G) and then insert it into the desired hole on the castor fork. 
Then meet on the opposite side with washer (H) and lock nut (I). Tighten the nut. 
Then exit by inserting your nut caps (J) over the lock nut.

Caster positioning

 

You kan adjust the castors in four (4) different height positions. This allows you to 
adjust the castor height after positioning the driving wheels.

Caster

J

I

G

J

A

D

C

B

H

F

K

E

Note!  

 

Secure that the screws is properly tighten after the adjustment.

Summary of Contents for Zitzi Seabass Pro

























































Reviews:

No comments