Anatomic SITT Zitzi Seabass Pro, User Manual

Page: 10 / 56

10 User manual Zitzi Seabass Pro www.anatomicsitt.com | +46 11 16 18 00
Armrests from seat
Installation of armrests from the seat
Mount the attached profile (A) under the front of the seat plate with the
supplied screw (B), washer (C) and nut (D) in the intended groove. Insert screw
(B) from below and put the washer (C) and nut (D) on top and tighten.
Mount the armrests by inserting the rail pins (I) in the profile tracks on the
armrest bracket (J). Adjust the width of the armrests to suite the width of the
seat system.
Tighten the screws (E) properly.
Width adjustment
To change the width of the armrest, loosen screw (E) and move the
armrest to desired positon. Tighten screw (E).
Height adjustment
To change the height of the armrest, loosen screw (F) and move the
armrest to desired height. Tighten screw (F).
Angle adjustment up / down
To adjust the angle of the armrest, loosen the hand lever (G) and move the
armrest to the desired angle. Tighten the hand lever (G).
Angle adjustment laterally
To adjust the armrest plate sideways and in angle, loosen the screws (H) and
move then armrest to desired position. Tighten the screws (H).
Note!
Be careful to avoid risk of pinching.