12
User manual Zitzi Active
www.anatomicsitt.com | +46 11 16 18 00
Mounting of armrests from back
Before mounting the armrests from the back, you must first remove the allen key
and possibly other details that are mounted already. These details may include a
headrest, upper mounting brackets and driving bow.
Loosen the stop screws (A) and move away the armrests (B) to access the screws
(C) through the holes in the bracket. Loosen the screws (C) enought to slide the
rail pins (D) in the tracks of the back profile. Adjust the bracket to desired height
before tightning the screws (C). Adjust the armrests (B) to desired widht and
tighten the stop screws (A).
Reassemble the details you removed before mounting the armrest bracket.
Armrest from back
Height adjustment
To adjust the height of the armrest, loosen
the screws (C). (The armrests may need to
be width-adjusted to the sides first if they
block the holes for the height adjustment).
Then adjust to desired height. Tighten the
screws.
Width adjustment
To adjust the width of the armrest, loosen the
stop screws (A) and then adjust to desired width.
Tighten the screws.
Adjusting the angle up/down
To adjust the angle of the armrest, loosen the le-
ver handle (E) and move the armrest to the desi-
red angle, then tighten lever handle (E).
Adjusting the lateral angle
To adjust the lateral angle of the armrest, loosen
the screws (F) and move the
armrest to the desired angle, then tighten the
screws (F).
F
A
B
D
E
C
