18
User manual Zitzi Active
www.anatomicsitt.com | +46 11 16 18 00
Mounting of calf support
Remove the pipe cover at the bottom and unscrew the end stop. Remove the
stop and foot plate from the stay. Insert the calf support bracket’s socket pins
on the outside of the sides, as shown below. Tighten the screws (A). Attach the
calf support plate as shown in the figure below with the attached screw joints
(B).
Reassemble the footplate, end stop and pipe cover.
Height / depth adjustment - calf support
Loosen the screws (A), then adjust the calf plate to the desired height and
depth. Lock the screws (A).
Side-/angle adjustment - calf support
Loosen the screws (B) a little, then adjust the calf plate sideways
and angle. Tighten the screws (B).
A
B
Calf support
= Adjustment bolts