APPH6000 User Manual V1.0 2010
- | Measurement using the Graphical User Interface (GUI)
22
Post processing and displaying results
Once a measurement is completed, the results are displayed in the plot window as shown in
Error! Reference source not found..
Using the plot configuration menu, the plots can be configured intuitively. Title, axis, and
legends can be set as required.
The active trace is plotted in red color. The following post-processing is supported:
Store plot in measurement window: press “Import Trace” to save a trace in the plot window. A
new trace becomes visible with a new color is assigned.
Make trace visible in plot window: newly imported traces are numbered data 1, data 2, data 3
etc. The trace label is shown in the small window. By checking the box next to the trace label,
the trace can made visible. Un-checking the box makes the trace invisible in the plot window..
Assign color to trace: Click one or multiple trace labels (multiple can be selected by
simultaneously pressing Ctrl) and then click on the color box on the right. Assign new color to
the trace by clicking on the color of your choice.
Assign new name to trace: Click one or multiple trace labels (multiple can be selected by
simultaneously pressing Ctrl) and then type the desired trace name in the name box at the
upper right side.
Remove trace from list: Click one or multiple trace labels (multiple can be selected by
simultaneously pressing Ctrl) and then press the delete button. Confirm delete.
Perform math on traces: Select single or multiple traces. Various math functions are supported
(GUI V1.2 and higher):
Sum, average and difference of traces
RMS Noise, Jitter, Residual FM over certain bandwidth
Allen Variance
To perform math function on particular traces, select trace and choose math function, then
press „New“ button. Depending on math function, a configuration window will appear or
computed trace is plot into plot window.
Please check manual update for further implementation details.
