7
6
Operation
This unit is designed for simple operation. Before operating the unit, it must be properly
installed and connected to the power source and load. See
Installation
for more details.
TO TURN THE UNIT ON:
1. Move the Power Switch to the ON position.
2. The alarm buzzer will sound briefly and the POWER LED will begin glowing green
indicating the power supply is supplying the load.
TO TURN THE UNIT OFF:
1. Move the Power Switch to the OFF position and wait for the POWER LED to stop
glowing.
2. Once all the LEDs are off, it is safe to disconnect the load and power source from the
power supply.
3. Move the Power Switch back to the ON position while disconnected from the power
source to discharge the internal capacitors.
4. After 30 seconds, move the Power Switch back to the OFF position. The unit can now be
safely serviced or put into storage.
