O2NE+ & Safe-Ox+
User Manual
Int. Approved
Document ref: P0120-820-14
August 2017
Page 6 of 23
Commercial in Confidence
4
Installation of the product
NOTE
–
The O2NE+ and Safe-Ox+ range of instruments are precision instruments and
therefore are susceptible to shock. Care should be taken when installing your O2NE+
or Safe-Ox+ so as to not damage the instrument.
4.1
Removal of warning label from display
Prior to fitting the Ax O2NE+™/Safe-Ox+™ the warning label must be removed from the
instrument display window. This is an easy peel label and should be removed easily without
leaving behind any residue.
4.2
Wall mounting
The Ax
O2NE+™/Safe-Ox+™ should be mounted onto a wall at normal working head height
using the mounting lugs and drilling template supplied. Use the paper template to drill the 4
required holes in the wall and use the rawl plugs and screws provided to mount the unit. It is
not necessary to dismantle the Ax
O2NE+™/Safe-Ox+™ main unit in any way prior to
installation. You need to ensure the mains plug, fused at 3 amps, is in easy reach of a power
socket.
The alarm repeater housing also has wall mounting lugs.
