Chapter 3 : OPERATING MODE (continued)
CENTRIX™ & EVENTIX™
PAGE 30
3-2. OPERATING WITH THE FRONT PANEL OF THE EVENTIX™ (continued)
3-2-1. OPERATING IN MIXER MODE (continued)
f
Double PIP transition:
•
Create a frame with 2 black areas with a standard drawing software. The 2 black areas will be receiving the PIP
source.
•
Connect to the EVENTIX the source providing the frame to be stored, and select the source.
•
Select the
record frame
mode (
LOGOS/FRAME > record frame > MAIN or PREVIEW
): the device displays
a white rectangle corresponding to the frame selection area. If necessary adjust the position and size of the frame
selection area (
LOGOS/FRAME > record frame > MAIN or PREVIEW > size or position
).
•
Adjust the
Luma Key
level to get to the desired Luma Keying (
LOGOS/FRAME > record frame > MAIN or
PREVIEW > Luma Key
).
•
Store the frame (
LOGOS/FRAME > record frame > MAIN or PREVIEW > store > frame 1 or 2
). The
memorization starts and will take about 2 minutes.
•
Display onto the
MAIN
&
PREVIEW
outputs, the 2 sources to be used for the PIPs.
•
Select a USER effect key or the PIP effect key. Then with the LCD menu select the holding duration (
double PIP
> duration > holding
), and select a frame (
double PIP > bkgd frame 1 or 2
).
•
Press on
TAKE
: the frame store is displayed onto the MAIN output together with the 2 PIP.
•
Adjust with the position & size of each PIP (
double
PIP > position or size
).
•
Adjust the mask size & position of each PIP in such manner that the 2 PIP will not be superposed into the black
areas (
double
PIP > mask position or size
).
•
Select
inlay = yes
, if you want to set the PIP in background (
double
PIP > inlay
).
See Figure 25: Double PIP. Page 23.
•
VIDEO OUTPUT ADJUSTMENTS
c
Select the output standard (
OUTPUT menu > video output > video standard > NTSC
or
PAL
).
d
Select the video "output rate" (
OUTPUT menu > video output > output rate >...
).
e
Select a level of anti-flicker (
OUTPUT menu > video output > flicker adj. >...
).
f
Select the zoom mode (
OUTPUT menu > video output > U/Over scan > underscan
or
overscan
).
•
AUDIO ADJUSTMENTS
For each AUDIO output, make the following adjustment.
c
Adjust the master volume (
AUDIO xxxx > master volume
).
d
Select the mono or stereo audio mode (
AUDIO xxxx > audio mode > mono or stereo
)
e
Select the
auto follow
or
breakaway
audio mode (
AUDIO > audio source > auto follow
or
input # x
):
-
auto follow
= the audio switching follows automatically the video switching.
-
breakaway
= the selected audio input is permanently diffused.
f
For each audio input, adjust the level (
AUDIO xxxx > audio level
) and the balance (
AUDIO xxxx > audio
balance
).
IMPORTANT:
If the auxiliary audio input (AUX) is used, don't forget to activate it with the LCD menu (
AUDIO
xxxx > AUX input > ON
).
www.liveline.be
Summary of Contents for CentriX CTX8022
Page 2: ...www liveline be ...
