Analog Devices EVAL-AD5413SDZ, User Manual

Page: 7 / 17

EVAL-AD5413SDZ Evaluation Board User Guide UG-1757
Rev. 0 | Page 7 of 17
Figure Label Function
P DIGITAL DIAGNOSTIC RESULTS menu. Click Update and Readback to trigger a write 1 to clear operation on the selected
check boxes and a readback from the digital diagnostic result register.
Q ANALOG DIAGNOSTIC RESULTS menu. Click Update and Readback to trigger a write 1 to clear operation on the selected
check boxes and a readback from the analog diagnostic result register.
R
When the HART_EN check box is selected, the HART_EN bit = 1 in the General-Purpose Configuration 1 register.
S Click Proceed to Memory Map to open the AD5413 memory map (see Figure 9).
T
Click Memory Map Side-By-Side to open the AD5413 memory map next to the block diagram.
U Click Example Sequences to open the example sequences window (see Figure 13).
Table 4. Register Controls Accessible via the GUI (See Label Kx in Table 3 and in Figure 8)
Figure Label Function
K1
Diagnostic Configuration . Click this button to activate the associated pop-up menu.
K2 GP Config . When this button is clicked, a pop-up menu appears to configure the general-purpose configuration registers.
K3
Key register dropdown menu. Use this dropdown menu to configure the key register.
K4 Fault Pin Config . When this button is clicked, a pop-up menu appears to configure the general-purpose configuration registers.
K5
Frequency Monitor menu. This menu displays the value in the frequency monitor when read.
K6 Clear Code menu. In this menu, use the text box to insert a clear code value in hexadecimal format.
K7
User Gain menu. In this menu, use the text box to insert a user gain value in hexadecimal format.
K8 User Offset menu. In this menu, use the text box to insert a user offset value in hexadecimal format.
K9 DAC Input Reg menu. In this menu, use the text box to insert the DAC value in hexadecimal format.
K10 14 Bit DAC . When this button is clicked, a pop-up menu appears to configure the general-purpose configuration registers.
K11 DAC Output Reg . This menu displays the hexadecimal value currently set in the DAC output register.
K12 Status Register . This menu displays the contents of the status register.
23
146
-
0
08
Figure 9. AD5413 Memory Map in the ACE Software