Analog Devices ADZS-BF707-BLIP2, Manual

Page: 3 / 60

Regulatory Compliance
The ADZS-BF707-BLIP2 board is designed to be used solely in a labora-
tory environment. The board is not intended for use as a consumer end
product or as a portion of a consumer end product. The board is an open
system design which does not include a shielded enclosure and therefore
may cause interference to other electrical devices in close proximity. This
board should not be used in or near any medical equipment or RF devices.
The ADZS-BF707-BLIP2 board is in the process of being certified to
comply with the essential requirements of the European EMC directive
2004/108/EC and therefore carries the “
CE ” mark.
The BLIP2 board evaluation system contains ESD (electrostatic discharge)
sensitive devices. Electrostatic charges readily accumulate on the human
body and equipment and can discharge without detection. Permanent dam-
age may occur on devices subjected to high-energy discharges. Proper ESD
precautions are recommended to avoid performance degradation or loss of
functionality. Store unused BLIP2 boards in the protective shipping pack-
age.