ADSP-SC589 EZ-Board® Evaluation System Manual
9
USB HS micro AB connector
HADC
0.1" and SMB connectors
PCIe
PCIe x 1 connector
RESET controller
Analog Devices ADM6315 microprocessor supervisory circuits
Debug (JTAG/SWD/SWO/TRACE) interface
JTAG 10-pin 0.05" header for use with Analog Devices emulator
TRACE/JTAG 38-pin Mictor header
Power measurements
INA3221 to measure 3V, VDD_INT, and VDD_EXT
LEDs
13 LEDs: one power (green), one board reset (red), seven Ethernet (green and amber),
one SYS_FAULT (red), and three general-purpose (amber)
Push buttons
Three push buttons: one reset, and two IRQ/Flag
Expansion Interface III connectors (EI3)
SMC0
PPI
SPORT
SPI
UART
TWI
TMR
GPIOs
PWR_IN
GND/3.3V output
External power supply
CE compliant
5V @ 3.6 amps
