ADSP-SC589 EZ-Board® Evaluation System Manual
5
Copyright Information
© 2015 Analog Devices, Inc., ALL RIGHTS RESERVED. This document may not be reproduced in
any form without prior, express written consent from Analog Devices, Inc.
Disclaimer
Analog Devices, Inc. reserves the right to change this product without prior notice. Information
furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is
assumed by Analog Devices for its use; nor for any infringement of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under the
patent rights of Analog Devices, Inc.
Trademark and Service Mark Notice
The Analog Devices logo, CrossCore, A B, EngineerZone, EZ-Board, EZ-KIT Lite and Vi+
2
are registered trademarks of Analog Devices, Inc. Blackfin, B, SHARC, SHARC+ and
SigmaStudio are trademarks of Analog Devices, Inc. All other brand and product names are
trademarks or service marks of their respective owners.
Regulatory Compliance
The ADSP-SC589 EZ-Board is designed to be used solely in a laboratory environment. The board is
not intended for use as a consumer end product or as a portion of a consumer end product. The board
is an open system design which does not include a shielded enclosure and therefore may cause
interference to other electrical devices in close proximity. This board should not be used in or near
any medical equipment or RF devices.
The ADSP-SC589 EZ-Board is in the process of being certified to comply with the essential
requirements of the European EMC directive 2004/108/EC and therefore carries the "CE" mark.
