Analog Devices ADSP-SC589 EZ-Board, Manual

Page: 3 / 65

2.28 Reference Design Information 25
3 ADSP-SC589 EZ-Board Hardware Reference 26
3.1 System Architecture 26
3.2 Software-Controlled Switches (SoftConfig) 27
3.2.1 Overview of SoftConfig 28
3.2.2 SoftConfig on the ADSP-SC589 EZ-Board 30
3.2.3 Programming SoftConfig Switches 31
3.3 Push Buttons and Switches 34
3.3.1 Boot Mode Select Switch (SW1) 35
3.3.2 Reset Push Button (SW2) 35
3.3.3 GPIO Push Buttons (SW3–4) 35
3.3.4 JTAG Interface Switches (SW6–7) 36
3.4 Jumpers 37
3.4.1 S/PDIF Loopback Jumper (JP1) 38
3.4.2 HADC Jumpers (J21) 38
3.4.3 Power Jumpers (P14–19, P23) 38
3.5 LEDs 38
3.5.1 SYS_FAULT LED (LED1) 39
3.5.2 USB to UART Activity LEDs (LED2–3) 39
3.5.3 Ethernet Speed LED (LED4) 39
3.5.4 Ethernet LEDs (LED5–8) 39
3.5.5 Power LED (LED9) 40
3.5.6 GPIO LEDs (LED10–12) 40
3.5.7 Reset LED (LED13) 40
3.6 Connectors 40
3.6.1 Battery Holder (J1) 41
3.6.2 Ethernet Connector (J2) 41
3.6.3 Link Port_JTAG Connectors (J3, J23) 41
3.6.4 S/PDIF Optical Tx Connector (J4) 42
3.6.5 PCIe Connector (J5) 42
3.6.6 Audio Input Output Connector (J6) 42
3.6.7 HADC Input Connectors (J7–J11) 43
3.6.8 CAN Connectors (J12–J13) 43
3.6.9 Ethernet Connector (J14) 43
3.6.10 S/PDIF Optical Rx Connector (J15) 43
3.6.11 Audio Output Connector (J16) 44
3.6.12 S/PDIF Digital Connector (J17) 44
3.6.13 SD Connector (J18) 44
3.6.14 ADC Connector (J19) 44
3.6.15 MLB Connector (J20) 45
3.6.16 Headphone Connector (J21) 45
3.6.17 CLKIN0 Connector (J22) 45
3.6.18 TWI0_SPI2 Connector (P1) 45
3.6.19 SigmaStudio Connector (P2) 46