background image

a

ABOUT ADSP-CM411F/412F/413F/416F/417F/418F/419F SILICON ANOMALIES

These anomalies represent the currently known differences between revisions of the ADSP-CM411F/412F/413F/416F/417F/418F/419F
product(s) and the functionality specified in the ADSP-CM411F/412F/413F/416F/417F/418F/419F data sheet(s) and the Hardware
Reference book(s).

PRODUCT REVISIONS

A product revision letter with the form "-x" is branded on all parts. The implementation field bits <31:28> of the JTAG0_IDCODE register
for the processor and <15:0> of the STATUSREG0 register for the Analog Front End (AFE) can be used to differentiate the revisions as
shown below.

Product REVISION

JTAG0_IDCODE<31:28>

AFE_STATUSREG0<15:0>

C

0x2

0x3082

0.0

0x1

0x3080

ANOMALY LIST REVISION HISTORY

The following revision history lists the anomaly list revisions and major changes for each anomaly list revision.

Date

Anomaly List Revision

Data Sheet Revision

Additions and Changes

07/24/2017

C

PrB

Added Silicon Revision C 
Added Anomalies: 

17000067

17000080

17000082

17000083

06/27/2016

B

PrB

Added Anomalies: 

17000063

17000064

17000066

17000075

,

17000076

17000077

 

Revised Anomalies: 

17000040

17000041

17000042

17000043

,

17000046

17000049

17000059

12/17/2015

A

PrA

Initial Version

ADSP-CM411F/412F/413F/416F/417F/418F/419F

www.analog.com

Technical Support

Document Feedback

with ARM Cortex-M4/M0 and 16-Bit ADCs

Mixed-Signal Control Processor

 

 

Silicon Anomaly List

NR004483C

Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.

One Technology Way, P.O.Box 9106, Norwood, MA 02062-9106 U.S.A.

Tel: 781.329.4700

©2017 Analog Devices, Inc. All rights reserved.

Summary of Contents for ADSP-CM411F













Reviews: