Analog Devices AD9166-FMC-EBZ, User Manual

Page: 22 / 23

UG-1698 AD9166-FMC-EBZ User Guide
Rev. 0 | Page 22 of 23
ADS7-V2EBZ Firmware Update Needed
Each ADS7-V2EBZ is loaded with the latest firmware available
at the time of manufacturing. When connecting the ADS7-
V2EBZ to a PC that has the latest version of DPGDownloader
installed, DPGDownloader may prompt the user to update the
firmware. It is a good practice to use the latest version of
DPGDownloader and upload the latest firmware version to the
ADS7-V2EBZ .
To manually update the ADS7-V2EBZ firmware, open the
DPGDownloader
application and click the
Advanced/Debug
button, as shown in Figure 23. Click the Update button. The
updater then runs and installs the firmware update. After the
firmware is updated, it may be necessary to power cycle the
ADS7-V2EBZ board and to close and reopen the
DPGDownloader
to apply the update.
2232
4-
02
3
Figure 23. Updating the ADS7-V2EBZ Firmware Version