![background image](http://html.mh-extra.com/html/amx/netlinx-nxr-zgw-pro/netlinx-nxr-zgw-pro_operation-reference-manual_2938122011.webp)
Overview
3
NXR-ZGW-PRO NetLinx ZigBee Pro Gateway & NXR-ZRP-PRO NetLinx ZigBee Pro Repeater
NXR-ZRP-PRO NetLinx ZigBee Pro Repeater
FIG. 2
NXR-ZRP-PRO, front and rear
NXR-ZRP-PRO Specifications
Dimensions (HWD):
• 906 x 2.500 x 3.424 (23.01 mm x 63.50 mm x 86.96 mm)
• Depth does not include antenna
Weight:
• 0.25 lbs (113.39g)
Power:
10.5 - 18 VDC; 13.5 (nominal operation voltage)
Memory:
• 1 Megabit external memory
• 128K microprocessor Flash memory
Radio Specifications:
• Frequency: IEEE 802.15.4
• Operating channels: 11 - 26
• Modulation technique: DSS
• Output power: Region/country specific
• Coverage area (N America): 165 feet (50.2m)
Communications
The NXR-ZRP-PRO communicates with a Netlinx master via a NXR-ZGW-
PRO. The NXR-ZGW-PRO communicates with a Netlinx master over TCP/IP
encapsulating the ICSP protocol via a physical Ethernet connection. The ICSP
device number can be set via the browser-based management interface.
Front Components:
LEDs
•
PWR/STATUS
- A green LED that blinks to indicate the device is powered but
not commissioned to a network. A solid light indicates a device powered up
and commissioned; Power OFF is indicated with no light.
•
ICSP
- The LED is on when the device is connected to the gateway and off
when not connected.
•
RF
- The LED blinks when RF is active and is off when RF is inactive.
Antenna Mount
A reverse SMA connection that supports a 2.4GHz antenna.
Reset Button
Press and hold for approximately 10 seconds to return the NXR-ZRP-PRO to
factory default settings.
LEDs
Antenna
RESET Button
2-pin 3.5mm
PWR connector
Front
Rear
Antenna
Antenna Mount