![background image](http://html.mh-extra.com/html/amx/netlinx-nxr-zgw-pro/netlinx-nxr-zgw-pro_operation-reference-manual_2938122019.webp)
Installation
11
NXR-ZGW-PRO NetLinx ZigBee Pro Gateway & NXR-ZRP-PRO NetLinx ZigBee Pro Repeater
Connecting the NXR-ZGW-PRO to a LAN
Insert one end of the CAT5 Ethernet cable into the rear RJ-45 jack (see FIG. 1 on page 1) and connect the other
end of the same cable to a master.
See
Mesh Network Arrangements
section on page 5 for possible network configurations.
Table-Top Installation
Using the provided rubber pads, place one in each bottom corner of the device. These will prevent scratches on
the table surface from the device casing.
Rack-Mount Installation
Using the Velcro pad provided, remove the backing and adhere one side to the device.
Remove the backing of the other side of the Velcro and place it on your rack where you want the NXR-ZGW-
PRO/ZRP-PRO mounted.
Before continuing, consult the
Setting up a network
on page 13.