NXR-ZGW-PRO Configuration Pages
31
NXR-ZGW-PRO NetLinx ZigBee Pro Gateway & NXR-ZRP-PRO NetLinx ZigBee Pro Repeater
Utilities
Click the
Utilities
button (FIG. 19) to access the tabbed
Utilities
page.
The tabs contained in the
Utilities
page are:
Device Firmware
- Click to open the
Device Firmware
tab (see below)
Connection Log
- Click to open the
Connection Log
tab (see the xxxxxx)
Traffic Log
- Click to open the
Network IP Settings
tab (see the xxxxxxx
Utilities - Device Firmware tab
Click the
Device Firmware
tab of the
Utilities
page to access the
Device Firmware
options (FIG. 20). This
page shows all the information about the status of firmware on network devices.
Allowing Firmware Updates To Individual Devices
1.
In the menu on the top of the NXR-ZGW Browser-Based Configuration Manager, select
Device
Firmware
under the section
Utilities
.
FIG. 19
Utilities Button
FIG. 20
Utilities - Device Firmware tab
Utilities - Device Firmware tab options
Auto Refresh
Automatically and regularly refreshes the Device Firmware Status list.
Refresh List
Manually refreshes the Device Firmware Status list.
Allow Updates
Selects all devices listed in the Device Firmware Status list and turns all permissions On or
Off.
Updates
Sets permissions to allow firmware uploads to the selected device.
EUI-64
The 64-bit EUI address of the device.
Description
The user-provided description of the device.
Status
The current activity of the device, whether active, standby, or offline.
Version
The current version of the ZigBee firmware.
Upload Status
Displays the ability of the firmware to be uploaded with new firmware. Handheld devices
will not receive uploads until they are placed in their charging cradles.
Devices showing an Upload Status of "Place In Charger" will not receive firmware
uploads until they are inserted into their charging cradles.