15.
Press the blue
Type
field (
from the Master Connection section
) until the choice cycles to the word
Ethernet.
16.
Press the
Mode
field until the choice cycles to the word
URL
.
By selecting
URL
, the System Number field becomes read-only (grey) because the panel pulls
this value directly from the communicating target Master (virtual or not). A Virtual Master
system value can be set within the active AMX software applications such as: NetLinx Studio,
TPD4, or IREdit.
17.
Press the
Master IP/URL
field to open a Keyboard and enter the IP Address of the PC used as the
Virtual Master.
18.
Click
Done
to accept the new value and return to the System Settings page.
19.
Do not alter the Master Port Number value (
this is the default value used by NetLinx
).
20.
Press the
Back
button to open the Protected Setup page.
21.
Press the on-screen
Reboot
button to both save any changes and restart the panel.
FIG. 41
Enter the IP Address
information of the PC
used as a Virtual
Master
The System Number is
assigned to the Master
within the AMX
software application
(these must match)
When using a Virtual Master,
there is no need to enter a
username and/or password
