Overview
7
Mio Modero R-3 Remote - Instruction Manual
NOTE:
Make sure to inset the battery wires in the case as shown in FIG. 2, or the wires may be damaged when replacing the
battery door.
4.
Place the battery door back on the device, and slide the door upwards to lock it in place.
Battery Low Indicator
When the battery charge level is too low to sustain continuous operation, the LCD flashes "Battery Low". If not recharged, the LCD
will flash again, and then the device shuts down to prevent a total discharge of the battery.
To recharge the battery, insert the Mio R-3 into the Mio Remote Charging Base (see the
Mio Remote Charging Base
section on
page 20).
Installing Custom Buttons
1.
Flip and turn the device so that the buttons are facing away from you and the device is upside down.
2.
Holding the Mio R-3 in both hands, place your thumbs on the battery door and push up to slide the battery door free. The
battery door will slide in the direction of the bottom end of the device.
3.
Unscrew the 6 screw points indicated in FIG. 3.
FIG. 2
Rechargeable Battery Port on The Mio Remote
FIG. 3
Internal Mio R-3 Components
Lithium-Ion Battery
Rechargeable Battery
Correct path for battery wires and connector
Rear view - Battery Compartment
Port Connection
6 Screw Points
Programming Jack
