Overview
6
Mio Modero R-3 Remote - Instruction Manual
NOTE:
This device has been evaluated and found to be compliant with the FCC Rules for RF Exposure when the device is operated at a
minimum separation distance of 2 cm. from the user and nearby persons. Operation of this device at closer distances should be
avoided.
Specifications
The Mio R-3 device specifications are as follows:
Touch And Tilt Sensor
The Mio R-3 wakes up upon touching either the chrome side rails or pressing a button. When the remote times out while holding it,
you can reawaken the device by tilting it. Errant jostling, such as a bumped table, will not wake the device unless you are actually
holding it.
Inserting or Replacing the Lithium-Ion Battery
The Mio Modero R-3 remote comes with a rechargeable Lithium-Ion battery that needs to be installed before use. To install your
Lithium-Ion battery into the device:
1.
Flip and turn the device so that the buttons are facing away from you and the device is upside down.
2.
Holding the device in both hands, place your thumbs on the battery door and slide the battery door free. The battery door
should slide toward the bottom end of the device.
3.
Connect the terminal end of the Lithium-Ion battery to the port as shown in FIG. 2. It may be necessary to use a thin, blunt,
non-conductive object to seat the battery connector fully within its port.
Mio R-3 (FG148-03) Specifications
Transmission
Frequencies
• Zigbee RF wireless network
• IR 38 Khz
• IR 455 Khz
Transmission Range
• ZigBee: 100 feet (30.48m)
• IR 38 Khz: 100 feet (30.48m)
• IR 455 Khz: 50 feet (15.24m)
Top Components
• LED - blue backlit buttons indicate device is awake
• Display (OLED) - 128 x 32 pixels, active area is 29.42mm x 7.98mm
• Pushbuttons - the power button is red backlit; the rest are blue backlit buttons. 45 buttons; 9 custom
buttons (3 macro and 6 device).
Rear Component
• Programming Port - 2.5 mm stereo female conductor jack
• Battery Door
• Rechargeable Battery Connection
Battery
Rechargeable Lithium-Ion
Dimensions (HWD)
9.50" x 2.00" x .74" (241.3 mm x 50.8 mm x 18.80 mm)
Weight
• .45 lbs (20 kg) without battery
• .55 lbs (25 kg) with battery
Supported Languages:
• English
• French
• German
• Greek
• Italian
• Japanese
• Korean
• Simplified Chinese
• Portuguese
• Russian
• Spanish
• Other languages supported by
Glyphs
Certifications
• FCC ID: CWU-NXR-MO
• IC: 5078A-NXRMO
• CE
• IEC-60950
• Japan Approval
• Designed for ZigBee
Operating Environment:
• Operating Temperature: 0° to 40° C (32° to 104° F)
• Storage Temperature: -20° to 70° C (-4° to 158° F)
• Relative Humidity: 5% to 85%
Included Items:
• Mio-RBP Rechargeable Lithium-Ion Battery (
FG147-10
)
Other AMX Equipment
• DB-9 extension cable (
FG10-727
)
• Programming Cable - a 3 wire, 2.5 mm stereo jack (
FG10-817
)
• Custom engraving (
FG147-01
)
• Mio-RCC Kit (
FG147-03K
)
• Mio-RCC Charging Base (
FG147-02
)
• NXR-ZGW-PRO (
FG5791-11
)
• NXR-ZRP-PRO (
FG5791-03
)
