![background image](http://html1.mh-extra.com/html/amx/design-xpress/design-xpress_instruction-manual_2938905048.webp)
Keypad Interface
44
Design XPress User Interface Guide
Keypad Interface - Call Notification
When an intercom zone is called or paged by another zone, the keypad automatically switches to
the
Intercom Call Notification
page (FIG. 59). Any audio currently playing in the zone is cut-off,
and the caller's microphone is routed to this audio zone. The callee can now hear the caller through
the audio zone speakers. At this point there is nothing more than a one-way connection.
The called zone must accept the call to make a two-way connection. To accept the call, press the
Menu Bar button. When this is done the microphone goes active, each user can hear the other, and
the keypad switches to the
Intercom Call-In-Progress
page (FIG. 60).
Keypad Interface - Call-In-Progress
This page is displayed on the caller's keypad when calling another zone and on the called keypad
when the call has been accepted. The first line of the page shows the zone which is connected to the
call (i.e. the intercom zone of the other keypad). The second line is always blank.
The third line allows you to enter the
Intercom Call Settings
page (FIG. 62) for intercom zone
configuration. The next two lines are for volume control. The last line is the timeout setting.
FIG. 59
Keypad Interface - Call Notification Page
FIG. 60
Keypad Interface - Call-In-Progress Page
Menu Bar button
Menu Bar button