![background image](http://html1.mh-extra.com/html/amx/design-xpress/design-xpress_instruction-manual_2938905023.webp)
Touch Panel Interface - Control Pages
19
Design XPress User Interface Guide
Temperature Control Page
Press the
Envir.
button on the
Main
page (FIG. 6) to open the Temperature Control page (FIG. 21).
The elements on this page include:
HVAC Zones Information table
: This table displays the current status of each zone in
the system.
HVAC Zones Edit buttons
: Press the
Edit
button next to each HVAC zone to open the
Temperature Control/Edit Page (FIG. 22), where you can edit the controls for that zone.
Previous/Next buttons
: Use these buttons to scroll forward to the next page or backward
to the previous page (up to 8 zones can be displayed per page; up to 30 zones total).
Touch Panel Interface - Temperature Control/Edit Page
The Temperature Control/Edit page (FIG. 22) is accessed by pressing the
Edit
button for a zone on
the
Temperature Control
page (FIG. 21). The temperature displays the heat and cool set points,
the current mode, and the fan (On/Off). To adjust the set point values, use the appropriate arrow
buttons. The display changes not when the arrow button is pressed but when the thermostat
acknowledges the change.
The mode button is a momentary button, and when pressed, cycles through the different
HVAC modes.
The fan button toggles the state of the fan. If the fan is
off
, the button is
black
. If the fan
is
on
the button is
green
.
The elements on this page include:
Current Temperature Display
: Displays the current temperature for the selected HVAC
zone.
Heat Set Point Setting
: The current Heat Set Point for the selected HVAC zone is
displayed. To adjust the set point value, use the Up/Down arrow buttons.
FIG. 21
Touch Panel Interface - Temperature Control Page
HVAC Zones
information table
Previous/Next buttons
HVAC Zone edit
buttons