AMX DAS-MET-NUM, Operation/Reference Manual

Page: 45 / 92

Basic Keypad Functions - DAS-MET-6SRC
37 Metreau Keypads
Press the center (Select) pushbutton on the Navigation Wheel to set the current balance settings, and
proceed to
SRS Adjustment mode.
Adjusting SRS Settings For a Room/Zone
When the Balance setting is set (via the Select button - see above), the next adjustment is for SRS Adjust :
The second-row right LED will blink to indicate that SRS Adjust mode is active (FIG. 6).
Rotate the Navigation Wheel to select the desired SRS mode.
Press the center (Select) pushbutton on the Navigation Wheel to set the current SRS settings, and
proceed to
LED "ON" Brightness Adjust mode.
Turning SRS Off
Press and hold the Center Navigation button while in SRS mode.
DAS-MET-6SRC - Privacy Mode Off/On
When Privacy Mode is engaged, the room/zone cannot be paged, apart from this, the room/zone will
function normally.
FIG. 6 SRS Adjust Mode
FIG. 7 Privacy Mode Off/On
Middle-right LED blinks to indicate
SRS Adjust mode
Select button for 4 second
to turn on Privacy Mode in
this zone.
With all Sources OFF,
press and hold the center
To use Privacy Mode in a specific zone, the keypad must be OFF (no sources
selected).