AMX DAS-MET-NUM, Operation/Reference Manual

Page: 26 / 92

Mounting and Installation
18 Metreau Keypads
Podium Mounting
1.
Use the cutout dimension for the wallbox to cutout the Mounting Frame install surface for the
keypad
2.
Confirm that the terminal end of the AxLink cable is disconnected, and not receiving power.
3.
Connect the AxLink power supply. The connector passes through the center of the Mounting Frame
and connects to the board.
4. With the Mounting Frame resting in the cutout area, drill the mounting holes into the flat surface.
Accent Frame
While the Metreau device family does fit into many International wallboxes, it may be necessary to
utilize the optional Accent Frame to completely cover the wallbox.
To install the keypad with the optional Accent Frame:
1.
Use the cutout dimension for the wallbox to cut out the install surface for the keypad.
2.
Place the Accent Frame on the wallbox; align the screw holes with the mounting holes on the
wallplate. Fasten the wallplate to the wallbox.
Based on the extensive number of international wallboxes it is not pragmatic to ship every possible
screw that could be used. Please use the screws appropriate for your specific wallbox.
3.
Confirm that the terminal end of the AxLink cable is disconnected, and not receiving power.
4. Connect the power supply. The connector passes through the center of the Mounting Frame and
connects to the board.
5.
Place the Mounting Frame on the Accent Frame; align the screw holes with the mounting holes and
fasten the Mounting Frame to the wallplate. The Accent Frame is shipped with two #6-32 x .187
long flat head screws (80-131); these are used to attach the keypad to the accent frames.
Do not overtighten the screws when mounting the Mounting Frame. The device
should be flush with mounting surface.
Do not overtighten the screws when mounting the Mounting Frame. The device
should be flush with mounting surface.