Wiring and Connections
23
Metreau Keypads
DAS-MET-6SRC - SWT Data and Power Connections
1.
Connect the Matrix Controller’s Zone Output connector to the four-pin connector on the rear panel
of the Metreau keypad labeled
TO CONTROLLER
for data and 12 VDC power.
2.
Connect the other four-pin connector on the keypad labeled
TO SPEAKERS to the SWT speakers
as
shown in FIG. 18.
DAS-MET-NUM - Connecting to the Main DAS-MET-6SRC Keypad
The DAS-MET-NUM Metreau numeric keypad connects to the main DAS-MET-6SRC keypad via a
14-pin connector, as indicated in FIG. 22:
The red line on the cable indicates Pin #1.
The cable cannot be twisted, it must be straight across (Pin #1 to Pin #1).
FIG. 21
SWT wiring
FIG. 22
DAS-MET-NUM connected to main DAS-MET-6SRC keypad
SWT connectors on
Mi-Series Controller
Speakers
Metreau keypad
R+
L
D
G
R
T
O
CONTR
O
LLER
T
O
SPEA
KERS
R-
L-
L+
Delta Series Controller
Carbon XA Series Amplifier
L
D
G
R
DAS-MET-NUM
DAS-MET-6SRC
14-pin connector
14-pin connector
Pin #1
Pin #1
Summary of Contents for DAS-MET-NUM
