![background image](http://html.mh-extra.com/html/amx/das-d-0404/das-d-0404_operation-and-reference-manual_2937825048.webp)
Programming the Delta System
40
Delta Series Audio Controllers
Labeling a Room
Any room can be named whatever the user wants (within the character selections) but is limited to 6
characters per zone.
To label a room, select
Room Label
and which of the rooms you want to label. The first letter will begin
flashing.
1.
From the Setup screen, select
Controller
. The
Controller Setup
screen will be displayed. The menu
selection immediately defaults to the
Exit
selection in the first screen of the Controller Setup Menu.
2.
Using the navigation button, select
Rm Info
and the
Room Information
screen will be displayed
(FIG. 38).
Default =
Exit
.
Room Label
will allow user to define names for each of the rooms/zones.
Status
will display the status for each of the rooms/zones.
FIG. 37
Labeling a Source
If you choose not to label a room and delete all the characters so only blank spaces
appear, when the room is activated there will be no text label shown on the Delta
Controller front panel. Default labeling is RM1-RM6.
Summary of Contents for DAS-D-0404
