![background image](http://html.mh-extra.com/html/amx/ctc-1402/ctc-1402_user-manual_2937744014.webp)
User Manual - CTC-1402
14
Receiver Rear Panel Description
No.
Name
Description
1
HDBT IN
Connect to the CTC-1402 transmitter via a shielded Cat 6A/7 cable.
2
HDMI IN 1-2
Connect to an HDMI sources.
3
HDMI OUT
Connect to an HDMI display.
4
AUDIO OUT
Connect to the audio system with the Phoenix Connector.
5
IR TX
Connect to an IR emitter cable for emitting remote signal from TX.
6
RESET
When CTC-1402 RX is powered on, use a pointed stylus to hold down the RESET button for 3 seconds
or more, then release, the unit will reboot and restore to its factory defaults.
7
12V
Connect to the provided DC 12V power adapter .
8
DEVICE
Connect to USB devices.
9
Host 1
Connect to a PC which is followed with HDMI IN1, when the source is selected. The USB devices (on TX
and RX) can be connected to a host PC.
10
Host 2
Connect to a PC which is followed with HDMI IN2, when the source is selected. The USB devices (on TX
and RX) can be connected to host a PC.
11
RS232-P
Connect an RS232 device to RS232-P of TX, and a device to RS232-P of RX for RS232 pass-through.
RS232-C
Connect to an RS232 slave device (such as a projector). Send commands via NetLinx Studio.
13
Relay 1
Connect to a screen with Phoenix Connector for closing the screen.
14
Relay 2
Connect to a screen with Phoenix Connector for opening the screen.
15
LAN 10/100
1-2
Connect to Ethernet devices.