manualshive.com logo in svg

AMX CTC-1402, User Manual

Share
Download
AMX CTC-1402 User Manual Download Page 11

User Manual - CTC-1402

11

No.

Name

Description

8

HDMI 2

HDMI 2 (RX) Button: press to select RX HDMI IN 2 as input.

LED: LED is located on the top of the button.

• 

Green: the input has signal and is selected.

• 

Yellow: the input has signal but is not selected.

• 

Red: the input has no signal but is selected.

• 

Off: the input has no signal and is not selected.

9

Display

Display Control Button: 
Short press - Set all the displays on.
Hold press for 3s - Set all the displays off.
LED (Blue): LED is located on the top of the button. 

• 

Blinking 1 time: Short Press the button, LED extinguishes after finishing the operation.

• 

Blinking 3 times: Hold press the button for 3 seconds, LED extinguishes after finishing the 

operation.

10

Relay 1

Relay 1 Button: Press to set the screen closed. 
LED (Green): LED is located on the top of the button. 
Short press the button, LED blinks 1 time and extinguishes after finishing the operation.

11

Relay 2

Relay 2 Button: Press to set the screen open. LED (Green): LED is located on the top of the button.
Short press the button, LED blinks 1 time and extinguishes after finishing the operation.

Summary of Contents for CTC-1402























































Reviews:

No comments

Brands by name

Popular brands

Load more brands