![background image](http://html.mh-extra.com/html/amx/ctc-1402/ctc-1402_user-manual_2937744026.webp)
User Manual - CTC-1402
26
Send Commands to Control a Device
Click “Diagnostics” on the menu bar, choose “Control a Device”.
A window will display as follows, enter a command in the textbox, and click “Send To Device”. (For API commands, see the Section API
Command Set.)
Telnet Control via NetLinx Studio
1.
Choose the device you want to control, right click, then choose TELNET Window->Launch TELNET window via NetLinx Studio,
enter the Telnet window, input the Telnet API in this window to control the device.
Note: For API Commands, see the section API Command Set