![background image](http://html.mh-extra.com/html/amx/axp-plv/axp-plv_instruction-manual_2937819014.webp)
Designing Touch Panel Pages
10
AXP-PLV PosiTrack Pilot Video Camera Controller
Activating Edit Mode
Before designing touch panel pages and buttons, you must activate EDIT mode. Once activated, use
the EDIT button to enter Edit mode. This mode has options to add and configure touch panels and
buttons. When powering up the touch panel, the first page is the Main page (see FIG. 10). Note that
the Edit button is not available initially.
General Button Categories (Cont.)
Status buttons
Status buttons always have a dark fill with light letters and have no
functionality except to display information.
Operation bars
Operation bars appear in the place of the Editor bar, after selecting a
button or page edit operation. The operation bar indicates which edit
function is currently active. When an edit operation is selected, it
remains active until you press EXIT.
Touch to Continue buttons
"Touch to Continue" buttons appear when an operation requires user
acknowledgement.
Joystick buttons
Joysticks are vertical and horizontal direction controllers for use with
pan and tilt camera controllers.
Bargraph buttons
Bargraph buttons display a dynamic bargraph (vertical or horizontal).
An example is the Battery level indicator button.
FIG. 10
Main Page
If you have a pre-programmed panel, you may not see the Main Page.
Summary of Contents for AXP-PLV
