![background image](http://html.mh-extra.com/html/amx/axp-plv/axp-plv_instruction-manual_2937819015.webp)
Designing Touch Panel Pages
11
AXP-PLV PosiTrack Pilot Video Camera Controller
To activate edit mode:
1.
Press SETUP in the Main page to open the Setup page (FIG. 11).
2.
Press PROTECTED SETUP to open the keypad.
3.
Enter 1988 (default password) in the keypad and press ENTER to open Protected Setup page.
If you press ENTER after typing an incorrect password, you are immediately returned to the
previous page.
4.
Press EDITOR to enable Edit mode. The EDITOR button is highlighted in the Protected Setup
page when enabled, as shown in FIG. 12.
5.
Press EXIT to close the Protected Setup page and return to the Setup page (now in the Edit
mode).
6.
Press EXIT again to return to the Main page. The EDIT button appears at the top of the page
indicating that Edit mode is active.
7.
Press EDIT to open the Edit bar. The BUTTON and PAGE options, in the Edit bar, (FIG. 13)
are used to design and modify button and page settings.
FIG. 11
Setup page
FIG. 12
Protected Setup page with the active EDITOR button
Summary of Contents for AXP-PLV
