![background image](http://html.mh-extra.com/html/amx/axp-plv/axp-plv_instruction-manual_2937819021.webp)
Designing Touch Panel Pages
17
AXP-PLV PosiTrack Pilot Video Camera Controller
Setting the level code
Level buttons set the device and number codes for the touch panels.
1.
Press DEV to open a keypad and set the device number.
2.
Enter 1, 2, 3, or 4 in the keypad. The programming software uses device codes
1 - 4 to identify the touch panel.
3.
Press ENTER to save the level device number, close the keypad, and return to the Button
Properties page.
4.
Press NUM to open a keypad and set the level number assigned to the device.
5.
Enter a number 1 – 8. Each device can have from 1 – 8 levels
except
joysticks, where the range
is 1 – 7.
6.
Press ENTER to save, close the keypad, and return to the Button Properties page.
Joysticks actually use two level numbers. The first is for the X-axis and the second is
for the Y-axis. You only need to specify the first level.
Summary of Contents for AXP-PLV
