![background image](http://html1.mh-extra.com/html/amx/axd-mcp/axd-mcp_instruction-manual_2939185018.webp)
Designing Touch Panel Pages
14
5.5" Color Passive Mini-Touch Panels
Setting the Device Base
Press the
DEVICE BASE
option, in the Protected Setup page (FIG. 14), to assign a base (starting)
device address to the touch panel.
1.
Enter the base address for the touch panel. The base address range is from 1 - 255. Standard
device addresses begin at 128.
2.
Press
ENTER
to save.
Setting the Device Used
Use the
DEVICE USED
option in the Protected Setup page (FIG. 14) to assign a value for the
number of devices being controlled by the touch panel.
1.
Press
DEVICE USED
to open the keypad and enter the panel’s device number from 1 - 4. Each
device number supports up to 255 programmable channel codes. The multiple device settings
allow you to create up to four unique touch panel buttons and/or pages. This value is used to
determine the current device being used by the panel.
2.
Enter the number of devices being used by the touch panel.
3.
Press
ENTER
to save the value.
Adding a Page
1.
Press
PAGE
on the Edit bar to open the
PAGE
menu.
2.
Press
ADD
to open the keyboard and enter a name for the new page. Page names can be up to
20 characters.
3.
Press
EXIT CHANGE
to save, close the keyboard, and go to the new page.
Setting the page color
1.
Press
EDIT
to open the Edit bar on the newly created page.
2.
Press
PAGE
on the Edit bar to open the
PAGE
menu.
3.
Press
PAGE COLOR
to open the color palette.
4.
Select a color from the palette; the page automatically changes to the new color.
FIG. 15
Main page with Edit bar
Edit bar