![background image](http://html1.mh-extra.com/html/amx/axd-mcp/axd-mcp_instruction-manual_2939185017.webp)
Designing Touch Panel Pages
13
5.5" Color Passive Mini-Touch Panels
3.
Enter 1988 (default password) in the keypad and press
ENTER
to open Protected Setup page. If
you press
ENTER
after typing an incorrect password, you are immediately returned to the Press
EDITOR
to enable Edit mode. The
EDITOR
button is highlighted in the Protected Setup page
when enabled, as shown in FIG. 14.
4.
Press
EXIT
to close the Protected Setup page and return to the Setup page (now in Edit mode).
5.
Press
EXIT
again to return to the Main page. The
EDIT
button appears at the top of the page
indicating Edit mode is active.
6.
Press
EDIT
to open the Edit bar. The
BUTTON
and
PAGE
options, in the Edit bar (FIG. 15), are
used to design and modify button and page settings.
FIG. 13
Setup page
Contrast levels may have to be adjusted due in part to variances in temperature. The
new range for Contrast is from 1 - 32.
The contrast of this panel will need adjustment as the temperature changes.This is
particularly true during the warm up period between when the unit is first turned on
and when the LCD display temperature stabilizes. If the contrast value is not
adjusted, the display may appear to have a non-uniform color in areas near the edges
of the display due to the heat generated by the CCFL tube, which runs around the
edge. AMX has increased the range of the contrast adjustment to allow for this nature
of the panel.
FIG. 14
Protected Setup page with the active EDITOR button