![background image](http://html.mh-extra.com/html/amx/axd-cv6/axd-cv6_instruction-manual_2938895009.webp)
Installation
5
6" Color Video Wall Panel
6.
Test the connection by reconnecting the AXlink connector to the Central Controller. Verify that
the panel is receiving power and functioning properly to prevent repetition of the installation.
7.
Disconnect the AXlink connector from the Central Controller until installation is complete.
8.
Connect the data and power wiring to the rear of the touch panel.
FIG. 4
Decor-style panel installation configuration for flat /solid surfaces
FIG. 5
Decor-style panel cutout dimensions for flat surface mounting
A
B
- Main AXD unit consists of
- Decor
faceplate
Install the #4-40
Solid surface
(can include a
the touch panel and housing
wall, podium, or
other level
surface)
machine screws
into the holes
shown below.
Screw length
depends on the
installation surface.
These 4 screws
are removed
to access or
replace the
battery.
6.79
(BEZEL)
6.21
5.97
.12
.76
2.900
4.43
5.37
(BEZEL)
.28 REF
ZERO RADIUS REQUIRED
IN THESE 4 CORNERS.
THESE 4 HOLES ARE ONLY REQUIRED
WHEN MOUNTING UNIT TO A SOLID
SURFACE (PODIUM, DESK, ETC.).
SECURE UNIT WITH #4 SCREWS.
SUGGEST INSTALLATION OF #4-40
THREADED INSERTS AT THESE 4
LOCATIONS.
FRONT BEZEL
CUTOUT
FRONT BEZEL
#4-40 machine screw inserts (#4 screws)
used for mounting to a flat surface (provided by
installer)