![background image](http://html.mh-extra.com/html/amx/axd-cv6/axd-cv6_instruction-manual_2938895007.webp)
Installation
3
6" Color Video Wall Panel
Installation
Mounting Decor-style Panels
The following paragraphs describe mounting the Decor-style touch panel using the different types
of available methods and surfaces.
Mounting the Decor-style panel into a pre-wall conduit box (BB-CV6)
The CV6 Conduit/wallbox is an optional metallic housing that is installed onto a beam in a
pre-wall
setting. The CV6 is housed in a plastic backbox (BB-CV6) that ships with the unit. To
install Decor-style touch panels into a conduit/wallbox pre-mounted within a solid surface:
1.
Remove the magnetically attached faceplate (
A
in FIG. 2) from the main AXD unit
(
B
in FIG. 2) by gripping the faceplate and pulling with gentle force.
2.
Remove any necessary wiring cutouts from the pre-installed (optional) conduit box
(
C
in FIG. 2) (BB-CV6) where the AXlink cable is threaded through for connection to the
touch panel (FIG. 2). The snaps located along the side of the conduit/wallbox can be snapped
off or used to mount the unit to a hard surface (like a wooden support beam).
3.
Thread the incoming AXlink wiring through the knockout.
4.
Disconnect the AXlink connector from the Central Controller and thread the terminal end of
the 4-pin AXlink cable through the circular cable knockouts provided on the wallbox.
5.
Attach the data and power wiring to the touch panel.
6.
Test the connection by reconnecting the AXlink connector to the Central Controller.
FIG. 2
Decor-style panel installation configuration for pre-existing conduit/wall box
A
B
- Main AXD unit consists of
C
- Optional BB-CV6
- Decor
faceplate
Install the (2) #4-40
screws into the places
indicated
Removable
tabs used to
the touch panel and backbox housing
conduit/wallbox
Cable
knockouts
mount the box
to a stud beam
Installed flush
against a solid
surface
Do not
use these
tabs to mount
conduit /wallbox