![background image](http://html.mh-extra.com/html/amx/axd-cv6/axd-cv6_instruction-manual_2938895010.webp)
Installation
6
6" Color Video Wall Panel
9.
Insert the main unit into the flat surface mounting until firmly positioned and flush with the
surface battery.
10.
Fasten the main AXD unit to the surface using the four surface-screws (#4 screws) supplied
with the enclosure (FIG. 7).
11.
Place the magnetic Decor faceplate (
A
in
FIG. 7) onto the main AXD unit (
B
in
FIG. 7) by
gripping the faceplate and placing it on with gentle force.
12.
Reconnect the AXlink wiring to the Central Controller. The touch panel beeps when power is
applied.
FIG. 6
Sample router cutout dimension template for the CV6
FIG. 7
Screw locations for flat surface mounting of the main AXD unit
SECURE UNIT WITH #4 SCREWS.
SOLID SURFACE (PODIUM, DESK, ETC.).
THREADED INSERTS AT THESE 4
LOCATIONS.
ONLY WHEN MOUNTING UNIT TO A
THESE 4 HOLES ARE REQUIRED
SUGGEST INSTALLATION OF #4-40
ONLY IF UNIT IS INSTALLED USING
DRYWALL EXPANSIONS CLIPS
THESE 2 NOTCHES ARE REQUIRED
(2 PROVIDED)
FRONT BEZEL
(NOT FOR USE WITH BB-CV6 CONDUIT BOX)
U
P
CUT-OUT TEMPLATE
AXD-CV6
U
P
NOTE ORIENTATION -
DRYWALL CLIPS (2)
REAR CONNECTORS
2" LONG SCREWS (2)
TOWARDS TOP
If something happens
to the template, contact
your sales representative
for another copy.
Four drilled holes correspond
to the four (#4) screws used to
secure the housing to the flat surface.
Surface mount screws
are inserted through the
outer holes along the housing.