AXCENTWire System Wiring Documentation Program
Using AXCENTWire
15
Using AXCENTWire
Overview
Follow the steps in this section to create and save a new AXCENTWire file.
Wiring and cabling documentation details can be as simple or as detailed as you
need them. The usefulness of the final documentation is totally within your
control. Be sure to consult with AMX customer support about special situations you
may encounter. Working with AMX specialists will help you avoid problems and
frustration when you develop your system documentation.
Creating a Project File
Follow these steps to create an AXCENTWire project document. The project
document example shown in Figure 18 shows a completed project file. Also, the
item numbers in these procedures refer to areas in Figure 17 and Figure 18.
1.
Run the AXCENTWire program. The window you see first is a new Axcent
Wiring Information window (Figure 17).
2.
Select Type in the menu bar. Then, click Axcent to display the connectors for
an AXCENT control system.
3.
Click the DealerID data entry field (item 6 in Figure 17), and enter the
DealerID. Character strings are limited as described in the File Description
subsection.
4.
Click in each of the remaining fields (items 7 through 12 in Figure 17), and
enter the required data.
Summary of Contents for AXCENTWire
