manualshive.com logo in svg

AMX AutoPatch CP-20A, Instruction Manual

Share
Download
AMX AutoPatch CP-20A Instruction Manual Download Page 37

Installing a CP-20A Remote

34

CP-20A Instruction Manual

Rack Installation

CP-20A Remote Panels are designed to fit in a standard EIA 19 in. (48.26 cm) rack. 

Once the CP-20A Remote is wired, follow the rack installation instructions below. If linking multiple 
panels, see “Linking Multiple Panels” on page 35 before installing the panels in a rack.

Note

: 

The optimum viewing angle for the screen is eye level.

To install the CP-20A Remote in a rack: 

1.

Insert the wired panel through the rear of the rack.

2.

Attach the panel with front-mounting screws to hold it firmly in place (FIG. 8).

Tip

: 

For a multi-panel system, you may find it easier to install the top panel first and move 

down from there.

3.

Apply power to the panel(s).

4.

Wait briefly for the system to establish communication with the remote panel. 

We recommend completing the installation by performing a test switch to make sure the system is 
working properly (see page 36).

Note

: 

If the CP-20A remote panel was not part of the original system, the current configuration file 

must be uploaded to the remote; for instructions, see page 29

.

FIG. 8  

Place in rack and fasten with mounting screws

Summary of Contents for AutoPatch CP-20A













































Reviews:

No comments

Brands by name

Popular brands

Load more brands