Verifying Signal Status
16
CP-20A Instruction Manual
Verifying Output Status
The example below verifies the signal status for Output
20: Speaker Set 2 Rm B
on Virtual Matrix 0.
Note
:
Checking the status of an output will not show other outputs connected to same input.
To verify the signal status of an output:
1.
At the Main Menu screen, choose the Status command.
If the Status command is not available, press the Function key to view additional
Main Menu options.
The Status Input screen appears.
2.
Choose the Output command from the bottom of the screen.
The Status Output screen appears, displaying the available output options.
