AMX ALD-1000D, Instruction Manual, Page: 30 / 35

Programming
23
ALD-D48 Network Lighting Solutions
String Feedback (Cont.)
P:K:<id>:<num>:[1:<addr>]
:<level>:<fade>
Scene information.
This string is sent when a program group query command is
received. This string is sent for every light in the group.
<id>: 1..100 = scene id queried.
<num>: num lights in scene.
1: this value is always 1.
<addr>: 1..48 = address of light in scene.
<level>: level of light in scene.
<fade>: fade time of light in scene.
P:K:1:6:[1:2]:40:2
P:K:1:6:[1:3]:50:2
FBMODE=<mode>
Reports feedback mode.
<mode>: sum of the following feedback modes:
0 = no feedback
1 = channel feedback
2 = level feedback
4 = string feedback
FBMODE=7 // channel, level and string
CONNECT=1:<state>
Connection status.
This string is sent whenever the link to an ALD-D48 goes online or
offline. This is not the link between the ALD-D48 and the NetLinx
master. This is the link between the ALD-D48 and the Lutron D48
controller board.
1: This value is always 1.
<state>: 0 = Offline
1 = Online
CONNECT=1:1
CONNECT=1:0
CONFIG=<sn>:<ver>
ALD-D48 device server configuration information.
Response to a CONFIG? request. This feedback string gives the
current configuration for an ALD-D48 device server.
<sn>: serial number of the ALD-D48 device server.
<ver>: ALD-D48 device server firmware version in vx.yy format.
CONFIG=6438547:v01.8
VERSION=<ver>
ALD-D48 firmware version information.
Response to a VERSION? request. Reports the current version
number of the firmware in an ALD-D48 device server.
<ver>: ALD-D4 8 device server firmware version in vx.yy format.
VERSION=v01.8