Configuring Acendo Vibe Conferencing Sound Bars
16
Acendo Vibe Conferencing Soundbars - User Guide
Configuring Acendo Vibe Conferencing Sound Bars
Overview
The ACV-2100/5100 Acendo Vibe Conferencing Sound Bars are configurable via the Acendo Vibe Configuration Tool
software (available to download from www.amx.com). Note that there are two versions of the configuration software tool
- one for PC and one for Mac.
NOTE:
This document uses the Windows version of the software for illustration purposes, however the Mac version works
identically.
The Acendo Vibe Configuration Tool organizes settings into four categories: Bluetooth, Events (ACV-5100 model only),
Audio and File, as indicated in the Side menu bar along the left side of the application window (FIG. 18):
NOTE:
In most cases the default settings should work fine without any need for adjustment. However, as part of the initial
installation process, it is necessary to use the configuration software tool to commission each Acendo Vibe unit.
The Acendo Vibe unit must be in Setup Mode in order to communicate with the Acendo Vibe Configuration Tool. See the
Entering Setup Mode section on page 21 for details.
Bluetooth options are described on page 22.
Events options are described on page 23.
Audio options are described on page 24.
File options are described on page 25.
FIG. 18
Acendo Vibe Configuration Tool (Bluetooth options shown)
S
id
e
Menu Bar
Software version information
Firmware version information
