Machine Control Solutions
Make
your work more efficient
pg. 23
•
When finished and at the home screen, you will see a deep orange color on the topo
data where you were also collecting in the Profile page.
2.6
Surface
A surface map is a (.nez) or (.tin) file that when loaded turns into a triangulated network. This
network uses precision calculations to determine location of the receiver.
When using Triangles option in Surface Display (see in settings):
After calculating you will be able to see, when you are inside of your colored triangles, a cut/fill
value in the left margin of the screen.
The darker/lighter the shade the higher intensity cut/fill.
•
Red = cut
•
Green = grade
•
Blue = fill
Figure 6: Showing a NEZ surface over the created topo
•
Select
Surface
then
Open
and use desired file.
•
Note
–
use an (.nez) file extension for your surface if you are creating it from a topo you
have created. In most cases, you will use this method.
When using Cut/Fill option in Surface Display (see in settings):
