Set up the DXZ4-A and DXZ4-AM
www.amulethotkey.com
| Page 21
3.5
STEP 5: Connect additional peripherals
Follow the manufacturer’s instructions to set up any additional
peripherals such as printers, web cams, tablets or similar.
3.4
STEP 4: Connect to a PCoIP host
After powering up the zero client, you are ready to establish a
new PCoIP session.
The DXZ4 security edition zero client connects to a remote PCoIP
host via the network port.
DXZ4 security edition zero clients support the following types of
PCoIP host:
•
Compatible Tera2 PCoIP host in hardware.
•
Compatible Tera1 PCoIP host in hardware,
•
Compatible PCoIP host in software
(VMware® View™ 4 and above).
Note:
We recommend reading
first
if
you are not already familiar with the concept of PCoIP.
3.4.1 Connect to a choice of hosts using SLP Discovery
Important!
This is one method you can use to quickly
connect your zero client to a host. For a detailed description
of all connection methods, see
If the zero clients and PCoIP hosts reside on the same subnet,
you can use the
Direct to Host + SLP session
connection type to
discover available PCoIP hosts on the subnet.
You must know the IP address (or MAC address) of the PCoIP
host that you want to connect to.
1.
Select the
Direct to Host + SLP Host Discovery
session
connection type from the drop down list.
Figure 15:
The.zero.client.OSD.discovers.and.lists.the.first.10.
available.PCoIP.hosts.discovered.
2.
Select the host you want and click
OK
.
If the zero client successfully connects to the host, the front
panel PCoIP status LED illuminates green to indicate an active
session.
3.
(Optional) You can also set the
Enable Auto-Reconnect
in the
advanced settings to remember the last connected PCoIP host.
Note:
You must also configure a
Direct from Client
session
connection type on the host.
