DXZ4 security edition zero client
Page 20
3.2
STEP 2: Connect the Monitors, Network cables,
Peripherals and Power
1.
Connect at least one compatible monitor to the DXZ4-A,
starting at the Video 1 port. See
.
Tip!
You may use any rear panel video port for the monitor.
However the default port is Video 1 port. You can change this
default in the
Display Topology
tab of the OSD configuration
menu later.
2.
Connect any additional monitors to the other Video ports.
The DXZ4-A and DXZ4-AM support up to four monitors.
3.
(Optional) Install the SFP modules if required.
4.
Connect the network cables to the network ports (RJ45 or
5.
Connect the PSU. See
.
Important!
Use only the PSU supplied with the zero client.
USB
Ports
Video
Port 1
Power
Supply
Unit
LAN/WAN
connection
PSU
Network Ports
(SFP model)
1
2
3
4
5
3.3
STEP 3: Power on the unit
1.
Press the POWER switch (see
). A short button press
turns on the unit.
2.
When the unit is on:
•
A short button press puts the unit into standby.
3.
Turn on the monitor and make sure the remote workstation
is on.
Power
Switch
Figure 14:
Power.on.the.unit
Figure 13:
Rear.panel.connections