Before you start
www.amulethotkey.com
| Page 13
1.13.1 Recommended enclosure size
To ensure adequate cooling in dual and quad head video appli-
cations, the enclosure must allow the following minimum gaps
around the unit:
• X=25mm, Y=25mm, Z=25mm.
Figure 4:
Minimum.gap.around.the.zero.client.
Note:
These recommendations assume room temperature is
25°C and the enclosure is fully open front and back for cable
and switch access.
1.13.2 Use a spacer to stack units
If you need to stack zero clients on top of each other, we
recommend that you separate the stacked units with spacers
where S=25mm.
Figure 5:
Use.of.spacers.with.two.zero-client
Without these spacers, airflow is restricted and can cause higher
than usual temperatures in some units.
Important!
Do not stack units without using spacers.
Figure 6:
Do.not.put.zero.clients.together.without.spacers