Revised: 12/16/2015
N:\AmTryke\Manuals and Instructions\New Manuals\Manual Docs and Pdf\JT2000
Finish seat assembly by attaching the seat cover to the seat frame. Find the two
edges that have pockets (two other
edges have straps or buckles) and:
1.
Slide the seat cover over the seat
frame.
2.
Lace the straps through the buckles
and tighten them by pulling. The
cover will conform to the seat frame.
Front Brakes
The front brake caliper is already installed but you need to install the brake
levers onto the handlebar and connect the brake cable to them (the cable is
already attached to frame).
Brake Levers
Each brake lever has a button on it with a spring underneath it. The brake lever
should be installed so that the button is on the top side and hand grip points to
the outside of the tryke.
Buckle
Step 1
Step 2
Finished seat
Seat
frame
TOOLS REQUIRED:
5 mm Allen wrench