Revised: 12/16/2015
N:\AmTryke\Manuals and Instructions\New Manuals\Manual Docs and Pdf\JT2000
Next, install the front wheel to the front fork of main frame:
1.
Remove the black plastic thread
protectors from each end of the
axle.
2.
Use the quick release wrench to
remove the thumb nut from one
side.
3.
Place the front wheel in the front
fork and slide the shaft of the quick
release axle through the center of
the rim.
4.
Put the spring of the quick release axle on the other side with the narrow
end pointing inward.
5.
Thread the thumb nut back on and tighten.
Step 3
Step 2
Steps 1 and 2
Step 3
Step 4
Nut &
washer
Nut
cover
Quick
release
axle
Thumb nut
Spring